SC Design Tube & Special Sections
Section & Profile
Heat Exchanger Tubes
Fittings & Other Range
Brass Tubes
Copper
Copper Cappilary Tubes
Finned Tube
Cupro Nickel
 
 
Discover the benefits of Fine-Fin Manufacturing
Quality Control
Heat Exchanger Design and Cost Comparison

FINE-FIN integrally finned tubing for high efficiency, corrosion resistant heat excl.
 
CORRUGATED TUBES
 
Instead of smooth tubes. The corrugation generates high turbulence in Media, Vastly enhancing Heat Transfer co-efficient for a given Reynolds number.
 
UNIQUE FEATURE: -
Compact Size, Saves Space.
Substantially Reduced Fouling.
High Response To Cleaning-in-place.
Virtually maintenance free.
Uniform Temperature Distribution Even for Highly Viscous Fluids.
Shorter residence Time, Low Product Hold-up.
Can also handle Liquids with high viscosity, suspended fibers and large particulates even up to 50 mm.
 
Our Specialty
 
Copper Fin Tubes
Shreya Coppers.METAL’S Copper & Cupro Nickel Fin tubes offers more surface area compared to plain tubes& increases heat exchange capacity of the tubes. Fin tubes are manufactured as per the customer’s specific requirements. We have the skill & necessary know-how for the production of integrated fin tubes & can manufacture the same as per your requirements.
 
Copper Fin Tubes

Wire Wound Fin Tube (Root Soldered)
Sheet Wound Fin Tube (Root Soldered )
 
The cooling fin tube is wound with wire or sheet duly root soldered. The extended surface area of these finned tubes are used in many applications, which are manufactured by the firm of any dia and length. The fin tubes normally are made of bare tubes of Copper, Cupro Nickel & Admiralty Brass with fin material of Aluminum & copper wounded around it.
 
Changeable Type Fin Tube
This type of fin tube is most suitable for air surface coolers. The cone of the tube is seamless and individual tube can be replaced in case of any failure without disturbing other tubes of air cooler.
 
SC FINNED TUBE        SC OUTER GROOVED TUBE
Fins/Inch
Nominal
Dimension
  Plain &Section
Dimension
  Finned
Section
Dimension
Wall

Out
Surface
Out/In
Surface
Cross
Sectional
  Out Dia
Wall Thk
Out Dia
Wall Thk.
Out Dia
Root Dia.
Thk.
Area
Radio
Area
19
15.88
0.71
  1.07
    0.64
12.34
3.48
1.00
19
15.88
0.89
  1.32
    0.79
12.34
3.60
0.94
19
15.88
1.07
15.88
1.47
15.88+0,V0.4 12.70
0.94
12.34
3.72
0.88
19
15.88
1.24
  1.65
    1.12
12.34
3.85
0.82
19
15.88
1.65
  2.11
    1.47
12.34
4.18
0.70
19
19.05
0.71
  1.24
    0.64
15.12
3.33
1.64
19
19.05
0.89
  1.32
    0.79
15.12
3.41
1.56
19
19.05
1.07
19.05
1.47
19.05+0,-0.4
15.88
0.94
15.12
3.5
1.48
19
19.05
1.24
  1.65
    1.12
15.12
3.60
1.41
19
19.05
1.65
  2.11
    1.47
15.12
3.84
1.24
19
19.05
2.11
  2.41
    1.88
15.12
4.13
1.07
26
15.88
0.71
  1.25
  0.60
0.60
15.34
4.30
0.97
26
15.88
0.89
15.88
1.42
15.88+0,-0.4
12.70
0.79
15.34
4.47
0.94
26
15.88
1.07
  1.68
    0.94
15.34
4.63
0.89
26
15.88
1.24
  1.88
    1.12
15.34
4.78
0.82
26
19.05
0.81
  1.42
    0.70
18.79
4.37
1.65
26
19.05
0.89
  1.50
    0.79
18.79
4.24
1.56
26
19.05
1.07
  1.68
    0.94
18.79
4.36
1.48
26
19.05
1.24
19.05
1.88
19.05+0,-0.4
15.88
1.10
18.79
4.47
1.41
26
19.05
1.47
  2.11
    1.25
18.79
4.37
1.35
26
19.05
1.65
  2.28
    1.47
18.79
4.28
1.30
26
19.05
1.83
  2.44
    1.65
18.79
4.20
1.26
 
Copyright © SHREYA COPPERS